Exchange Magnifier
In the high vacuum metallized Chrome Division guarantees a high-precision measuring scale the PEAK measuring magnifiers was program of M-service & equipment by the two high-precision measuring magnifiers by F & C expands. The special design of the loupes with an ideal light entry angle, is a perfect complement to the PEAK products. Is the perfect description of this classic: hybrid between a traditional measuring Magnifier and a crack magnifying glass. The focus is made possible by the sliding seat of optics at the crack magnifiers. An excellent light entering the light window is possible thanks to the inclined position. Particularly to emphasize is on the glass in the high vacuum metallized Chrome Division, which provides a high mechanical and chemical resistance.
The F & C measuring Magnifier convinces through excellent sharpness and a high-quality, achromatic lens system. The measuring Magnifier is supplied in a handy, scratchproof plastic case. Measurements are possible in both bright and dark objects due to the special design of the scale. The coverage of the lower part of the scale in Lengthwise, it becomes opaque and is thus also on dark objects visible. een very successful. The tick marks extended the coverage are ideally to transmitters, according to the measuring jaws at the micrometer or the Calliper gauge. The version SRW-8 offers the following divisions, radii and angles: 0 15 mm, pitch 0.1 mm, accuracy 0.05 mm, with angles of 0 90 rising ever 5, RADIUS rising 0.5 6.0 mm to 0.5 mm, diameter 0.1 1.0 mm. Alternatively measuring Magnifier for the length or width measurement with a 0.1 mm pitch and 15 mm measuring length is the F & C available, by a 0.005 “Division with measuring length 0.6” is completed.
The measuring accuracy is 0.05 mm / 0.0025 “. Both scales in same magnifying glass can be used in the Exchange. What is an Aplanat? An aplanatic lens system consists of two plankonvexen lenses and a sharp edge and distortion-free illustration shows this arrangement. It consists of two plankonvexen lenses, with its curved (convex) side to each other are arranged. This plano-convex lenses are predominantly manufactured from glass. It spherical lenses are lenses with only a RADIUS, which extends over the entire lens surface boundaries so, used. Aplanatic lens systems come in magnifying glasses to use, that have excellent imaging properties up to the edge. Such magnifying loupes with convex lenses due to the significantly improved figure properties differ from the ‘standard’, because the distortion resulting usually in the margin area are eliminated entirely.
